Wall / ceilling assembly:
Calculation of the width of the hanging and determination of the suitable sunshade or blackout blind

Measure the desired total length "A". Our standard roller blinds have a maximum total length of 250 cm. Intermediate positions (shorter than 250 cm) are set directly on the motor (end position adjustment).

For wall or roof mounting, please consider the position of the brackets which is usually 10 to 30 cm above the wall opening (for the window or door). Add this value to the total height of the wall opening.

Add to the total width "B" of the wall opening a protrusion of at lealst 8 cm (4 cm each side) to get a good shading / blackout experience.

Our standard roller blinds (on stock) are available in width increasements of 10 cm steps. The allowance of the blind width towards the width of the hanging is 6.5 cm (resp. 5.5 cm with our idler bracket and motor blacket with flat square shaft reception, item no. BBC64-11-F, optional accessories).

The dimensions of our blinds that are on stock you can see in our product table.

Our standard roller blinds (on stock) are available in width-increments of 10 cm steps. The cut-off dimension of the roller blind width to the fabric width is 6.5 cm (or 5.5 cm with a flat-fitting square socket bracket (Item No. BBC64-11-F)

    Example:
    Wall opening: Width = 100 cm; Height = 120 cm
    Mounting over wall opening: 15 cm
    Extraction dimension: roller blind width - fabric width = 6.5 cm
    -> Minimum width roller blind = 100 cm + 6.5 cm + 8 cm = 114.5 cm
    -> Minimum height roller blind = 120 cm + 115 cm = 135 cm
    -> Standard dimensions heicko e-ast (on stock): 120 cm x 250 cm

Custom-made products are available within approx. 8 weeks.
Learn more about choosing the right fabric (Fabrics with different densities)!

Mehr Infos: https://www.heicko-bewegt.de/en/tageslich-und-verdunklungsrollos/rollo-arten/dimensions/
Our standard roller blinds (on stock) are available in width-increments of 10 cm steps. The cut-off dimension of the roller blind width to the fabric width is 6.5 cm (or 5.5 cm with a flat-fitting square socket bracket (Item No. BBC64-11-F)

    Example:
    Wall opening: Width = 100 cm; Height = 120 cm
    Mounting over wall opening: 15 cm
    Extraction dimension: roller blind width - fabric width = 6.5 cm
    -> Minimum width roller blind = 100 cm + 6.5 cm + 8 cm = 114.5 cm
    -> Minimum height roller blind = 120 cm + 115 cm = 135 cm
    -> Standard dimensions heicko e-ast (on stock): 120 cm x 250 cm

Custom-made products are available within approx. 8 weeks.
Learn more about choosing the right fabric (Fabrics with different densities)!

Mehr Infos: https://www.heicko-bewegt.de/en/tageslich-und-verdunklungsrollos/rollo-arten/dimensions/
Our standard roller blinds (on stock) are available in width-increments of 10 cm steps. The cut-off dimension of the roller blind width to the fabric width is 6.5 cm (or 5.5 cm with a flat-fitting square socket bracket (Item No. BBC64-11-F)

    Example:
    Wall opening: Width = 100 cm; Height = 120 cm
    Mounting over wall opening: 15 cm
    Extraction dimension: roller blind width - fabric width = 6.5 cm
    -> Minimum width roller blind = 100 cm + 6.5 cm + 8 cm = 114.5 cm
    -> Minimum height roller blind = 120 cm + 115 cm = 135 cm
    -> Standard dimensions heicko e-ast (on stock): 120 cm x 250 cm

Custom-made products are available within approx. 8 weeks.
Learn more about choosing the right fabric (Fabrics with different densities)!

Mehr Infos: https://www.heicko-bewegt.de/en/tageslich-und-verdunklungsrollos/rollo-arten/dimensions/



Custom-made products are available within approximately 8 - 10 weeks.

Learn more about choosing the right kind of fabric (fabrics with different densities) !