HREBH - PREMIUM - 

with electronic or automatic limit setting, anti-freezing protection and obstacle detection

HREBH-Series
Due to a diameter of 45 mm, the motor is suitable for 60’s and 70’s octagonal shafts. The improved clippable motor head ensures a simple and speedy assembly. The obstacle detection function stops the downward movement if an obstacle had been recognized by the motor. The anti-freezing protection function reacts, if during the upwards movement, the rollers encounter a strong opposing force e.g. if they freeze on the window sill. This in turn prevents damage to the roller shutters and the motor. The limits can be adjusted automatically or manually through an external adjusting knob or through an external cable (HR130001-E)
Note:
Shaft connector or anti-lift locks are needed for the blockage recognition function. These hinder the upwards movement when an obstacle is identified. Stopper or angled rails are needed for the automatically adjustable limits. The obstacle detection function is not advisable for small windows or when multiple shutters are being utilised.

Short introduction:
• Manually or automatically adjustable limits, adjustable by using an
  external adjusting knob or setting cable (no tools needed)
• Permanent preservation of the limits in case of power failure
• Anti-freezing protection (blockage resistance): The motor automatically
  switches off, if the upwards movement is hindered
• Obstacle detection: The motor automatically switches off, if an obstacle is
  identified during the downwards movement
• A retrofitting with various different emitters from heicko is also possible
• 5 year warranty on faultless performance
• A 70’s adapter with in conjunction with adapter HR130012 for faultless
  operating of the obstacle detection function (optional)

Scope of supply:
Electronic tubular motor
• Pre-assembled adapter-kit for octagonal-shaft
• Adapter-kit for round shaft 54 mm (only*FP/*FS models)
• German manual and assembly instructions
  (other languages on request)



   
Type HREBH6020-17 HREBH6030-17 HREBH6020-17-FP HREBH6020-17-FS
     
TÜV approved X X X X
Length without bracket 575 mm 605 mm 615 mm 615 mm
Motor diameter 45 mm 45 mm 45 mm 45 mm
Input voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Power 203 W 226 W 203 W 203 W
Rated torque 20 Nm 30 Nm 20 Nm 20 Nm
Maximum load 45 kg 68 kg 45 kg 45 kg
Rated RPM 17 rpm 17 rpm 17 rpm 17 rpm
Current consumption 0.84 A 0.95 A 0.84 A 0.84 A
Power on duration 4 min 4 min 4 min 4 min
Number of wires 4 4 4 4
Motor protection, ISO-class H H H H
Protection type, VDE 700 IP44 IP44 IP44 IP44
Cable length 2.0 m 2.0 m 2.0 m* 2.0 m*
For shaft diameter 60 mm, octagonal shaft 60 mm, octagonal shaft Ø 54 mm round
*FP= Zurflüh-Feller
Ø 54 mm round
*FS= Soprofen