ERE - THE PRACTICAL- 

with electronic limit switch. anti-freezing protection and square shaft reception

ERE-Series
The motors in this series are suitable for 40’s, 60’s as well as 70’s octagonal shafts. This is possible due to the motors being available with a diameter of 35 mm and 45 mm. Due to the fact that the limits of this tubular motor can be set up through either the seting cable HR130001-E or a button on the motor’s head, any adjustment to them can be carried out quickly even after fitting the roller shutter motor, without having the need to open the roller box. The blockage resistance function reacts if during the upwards movement, the rollers encounter a strong opposing force e.g. if they freeze on the window sill. The tubular motor is
maintenance-free with a long life span. Furthermore, the motor is silent and is also equipped with a thermal overload protection system.
Note:

No shaft connector or anti-lift locks are needed for the blockage resistance
function.

Short introduction:
• Electronically adjustable limits, adjustable by using adjusting knob or
  setting cable (no tools needed)
• Permanent preservation of the limits in case of power failure
• Anti-freezing protection (blockage resistance): The motor automatically
  switches off, if the upwards movement is hindered
• Simple and speedy assembly and adjustment of the limits, ideal for
  industrial use
• A retrofitting with various different emitters from heicko is also possible

Scope of supply:
• Electronic tubular motor
• Pre-assembled adapter-kit for octagonal shaft
• Universal bracket
• Splint
• German manual and assembly instructions
  (other languages on request)



 

 

Type ERE1040-10 ERE1060-20 ERE1060-30
 
Length without bracket 570 mm 575 mm 605 mm
Motor diameter 35 mm 45 mm 45 mm
Input voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Power 116 W 203 W 226 W
Rated torque 10 Nm 20 Nm 30 Nm
Maximum load 23 kg 45 kg 68 kg
Rated RPM 14 rpm 17 rpm 17 rpm
Current consumption 0.49 A 0.84 A 0.95 A
Power on duration 4 min 4 min 4 min
Number of wires 4 4 4
Motor protection. ISO-class H H H
Protection type. VDE 700 IP44 IP44 IP44
Cable length 2.0 m 2.0 m 2.0 m
For shaft diameter 40 mm, octagonal shaft 60 mm, octagonal shaft 60 mm, octagonal shaft