HREFBH - EASY PREMIUM - 

with electronic or automatic limit setting. anti-freezing protection. obstacle detection and built-in receiver

HREFBH-Series
Due to a diameter of 35 mm and 45 mm, the motors are suitable for 40’s, 60’s and 70’s octagonal shafts. The improved clippable motor head ensures a simple and speedy assembly. The obstacle detection function stops the downward movement if an obstacle had been recognized and the motor does bounce back
by 10 - 15 cm. The anti-freezing protection function reacts, if during the upwards movement, the rollers encounter a strong opposing force e.g. if they freeze on the window sill. This in turn prevents damage to the roller shutters and the motor. The limits can be adjusted automatically, manually and even wireless. This
motor is an optimal solution for all who prefer an even faster assembly with a long maintenance free life span.
Note:
Shaft connector or anti-lift locks are needed for the blockage recognition function. These hinder the upwards movement when an obstacle is identified. Stopper or angled rails are needed for the automatically adjustable limits. The obstacle detection function is not advisable for small windows or when multiple
shutters are being utilised.

Short introduction:
• Manually or automatic (wireless) limit setting (no tools or cable needed)
• Permanent preservation of the limits in case of power failure
• Anti-freezing protection (blockage resistance): The motor automatically
  switches off, if the upwards movement is hindered
• Obstacle detection: The tubular motor automatically switches off, if an
  obstacle is identified during the downwards movement
• Built-in receiver
• Easy control with various different emitters from heicko such as 
  HR120026A, HR120028A, Hr120029A, HR120030A, HR120032WA,   
  HR120038A
• 5 year warranty on faultless performance
• A 70’s adapter with transitional item (HR130012) for faultless operating
  of the hindrance recognition function (optional)

Scope of supply:
• Electronic tubular motor
• Pre-assembled adapter-kit for octagonal shaft
• Adapter-kit for round-shaft 54 mm (only*FP/*FS models)
• German manual and assembly instructions
  (other languages on request)



   
Type HREFBH4010-14 HREFBH6020-17 HREFBH6020-17-FP HREFBH6020-17-FS
     
TÜV approved X X X X
Length without bracket 570 mm 575 mm 615 mm 615 mm
Motor diameter 35 mm 45 mm 45 mm 45 mm
Input voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Power 116 W 203 W 203 W 203 W
Rated torque 10 Nm 20 Nm 20 Nm 20 Nm
Maximum load 23 kg 45 kg 45 kg 45 kg
Rated RPM 14 rpm 17 rpm 17 rpm 17 rpm
Current consumption 0.49 A 0.84 A 0.84 A 0.84 A
Power on duration 4 min 4 min 4 min 4 min
Number of wires 3 3 3 3
Motor protection. ISO-class H H H H
Protection type. VDE 700 IP44 IP44 IP44 IP44
Cable length 2,0 m 2,0 m 2,0 m* 2,0 m*
For shaft diameter 40 mm, octagonal shaft 60 mm, octagonal shaft
Ø 54 mm round
*FP= Zurflüh-Feller
Ø 54 mm round
*FS= Soprofen
Radio frequency 433.92 MHz 433.92 MHz 433.92 MHz 433.92 MHz